Worldwide Timber Traders

MDF (Standard) E1 & E0 Available
Medium Density Fibreboard or MDF is a versatile wood panel product which differs from particleboard in that the wood chip is reduced to a fibre which in its raw form is similar to cotton wool. Resin is added in the manufacturing process to produce a panel that has a smooth surface on both sides and an even density profile through whisk makes an ideal substrate to router and groove. These characteristics also allow intricate and precise machining and finishing techniques when producing high quality cabinetry components. The product is also used extensively for handyman projects as it offers a high quality surface for sprayed and hand painted treatments.

*Please note that not all sizes are available in thicknesses offered. Our stock is continually changing, please call or e-mail to verify available stock and quanities.

External Use:
Internal Use: Cabinet Making - Shopfitting - Picture Frames - Toys - Furniture
Size: 2400mm x 1200mm, 2440 x 1220*, 2400mm x 1800mm, 3600mm x 1200mm, 3600mm x 1800mm
Thickness: 3*mm, 4.75*mm, 6*mm, 9mm, 12mm, 16mm, 18mm, 25mm, 32mm

MDF - HMR - E0 - (Highly Moisture Resistant)
HMR MDF has a special water - resistant resin added to the panel, providing moisture resistant properties and increased dimensional stability and is used in areas subject to humidity.

External Use:
Internal Use:
Skirting - Architraves - Laundries - Shopfitting - Cabinet Carcases - Kitchens - Stairs
Size: 2400mm x 1200mm
Thickness: 12mm, 16mm, 18mm, 25mm, 32mm

MDF - E1 - MDF (Low Formaldehyde)
E1 - Medium Density Fibreboard is a low Formaldehyde grade substrate produced using enhanced eco - friendly resins and technology. E1 - MDF has excellent strength quality, surface smoothness, stability and superior edge profile with reduced formaldehyde emissions. Surfaces can be painted to achieve a high quality finish and provides a uniform substrate for overlaying. This product should not be used in exterior applications, or exposed to water or high humidity situations (saunas, shower cabinets), and should be kept clear of nearby heat sources as solid fuel heaters and free standing fireplaces.

External Use:
Internal Use:
Furniture, Joinery, Cabinet Making, Kitchen Cabinets
Size: 2400mm x 1200
Thickness: 18mm

E0 Fire-Retardant MDF
Veneers backed with E0 Fire-Retardant Black MDF meets BCA Fire Hazard Group 2 requirements for commercial interiors (Class 2 to Class 9 Buildings) and is fully backed by comprehensive certificates.

External Use:
Internal Use:
Acoustics, Wall Panelling, Ceiling Panels, Hospitals, Public Buildings, Lifts/Elevators, Veneers, and more
Size: 2440mm x 1220mm
Thickness: 12mm Black MDF, 12mm STD MDF, 18mm STD MDF

HMR - PRE Formed MDF
HMR MDF - (Highly Moisture Resistant) this is 32mm Pre Formed on 1 long edge. Available in 600mm and 900mm widths. This is ideal for the Benchtop Market.

Internal Use:
This is a pre-formed ready profiled HMR MDF panel aimed at the Benchtop market, and is ready to made into a rolled front Laminate Benchtop
Size: 3600mm x 600mm, 3600mm x 900mm
Thickness: 32mm

E0 Primed MR MDF Mouldings
Alpine MDF Primed Mouldings are produced from premium quality, moisture resistant Medium Density Fibreboard (MDF).  Mouldings are suitable for interior applications and are available in a wide range of profiles to suit modern and traditional decors.  Our mouldings are resistant to warping, twisting and are free of knots or imperfections to make installation easier.

Application:
Alpine MDF Primed Mouldings are used as skirtings, architraves, door jambs and lining boards.  Alpine MDF Primed Mouldings are designed for interior use and are not recommended for use in situations where they will be exposed to water or prolonged high humidity (e.g. shower cabinets, saunas or in exterior applications).  In situations where they will be exposed to heat from fireplaces or solid fuel heaters, Alpine MDF Primed Mouldings should be installed with the same clearances used for solid timbers.

Please contact us today for profile range (08)9418 3222

Half Splayed Skirting
67 x 18
92 x 18
140 x18

Single Bullnose Skirting
67 x 18
92 x 18

Bullnose Architrave
67 x 18

Lambs Tongue Skirting
67 x 18
92 x 18
140 x 18

WA Colonial Skirting
67 x 18
87 x 18
140 x 18

Square Dressed
30 x 12
42 x 12
67 x 18
92 x 18


Particleboard - HMR (Highly Moisture Resistant)
Particleboard - HMR is highly moisture resistant and can be used in areas of high humidity or were occasional wetting may occur.

Internal Use: Kitchen Cupboards - Laundry Cupboards - Bathroom Cupboards - Shelving
Size: 2400mm x 1200mm, 2400mm x 1800mm, preformed edge 3600mm x 600mm/900mm
Thickness: 12mm, 16mm, 18mm, 25mm, 33mm

Particleboard - (Standard)
Particleboard is an engineered wood product manufactured from wood particles, such as woodchips, sawmill shavings, or even saw dust, this is mixed with synthetic resin or other suitable binder which is then pressed an extruded. Particleboard is a type of fibreboard, a composite material, but is made up of larger pieces of wood than MDF (Medium Density Fibreboard) and Hardboard. Particleboard is most commonly used as a substrate for applying laminates in Benchtop applications and indoor building requirements.
 
Internal Use: Wardrobes - Substrates for Benchtops - Wall Units - TV Cabinets - Joinery - Cupboards - Shelving - Wall Linings.
Size: 2400mm x 900mm, 2400mm x 1200, 2400mm x 18mm, 3600mm x 600, 3600mm x 900mm
Thickness: 9mm, 12mm, 16mm, 18mm, 25mm

HMR - PRE Formed Particle Board
HMR Particleboard - (Highly Moisture Resistant) this is 33mm Pre Formed on 1 long edge. Available in 600mm and 900mm widths. This is ideal for the Benchtop Market.

Internal Use:
This is a pre-formed ready profiled HMR Particleboard panel aimed at the Benchtop market ,and is ready to made into a rolled front Laminate Benchtop
Size: 3600mm x 600mm, 3600mm x 900mm
Thickness: 33mm

How can we help you today?

Fields marked with * are required

Captcha Image Reload image challenge